Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more
REPAIR FORM  GET A FREE QUOTE

Subsurface Instruments Products - Subsurface Instruments ML-1 Magnetic Locator

ML-1
Magnetic Locator

All-inclusive magnetic locator with simple, one-handed operation.

The ML-1 is one of SSI’s longest-enduring and popular products for magnetic detection. Whether you’re seeking corner markers (iron or steel), well casings, steel drums or septic tank handles, this is the go-to magnetic locator for you. And for good reason. The ML series offers simple one-handed operation with an easy-to-learn keypad featuring only three buttons – no menus or cumbersome instructions to follow. The audio unit has the volume built into the on/off key; just hold down the key while it cycles through the settings. The ML-1 features strong monotube construction, providing structural integrity you can count on.

Subsurface Instruments - Subsurface Instruments ML-1 Magnetic Locator

Locating along the side of a chain link fence might seem difficult, but we recommend a method that will help you identify your target easily and quickly.

It requires a lower sensitivity setting and placing your magnetic locator in the right position.

Subsurface Instruments - Subsurface Instruments ML-1 Magnetic Locator

*Click on Tabs to view more information.

  • Easy and simple one-hand operation; built-in handle
  • Easy to learn; 3 keypad switches: on/off and volume, sensitivity up and sensitivity down
  • Volume built into the on/off key; just hold down the key while it cycles through the settings
  • The electronic keypad “clicks” when a key is depressed. A “real” speaker is in the front panel, providing outstanding volume.
  • Microprocessor remembers the volume and gain settings from the last time the unit was on Non-metered (ML-1) and metered (ML-1M) versions are designed to look, feel and operate the same
  • Strong aluminum monotube construction from the tip through the end of the handle and ABS injection-molded electronics case (3 ¼” tapered to 2 ½”-wide X 4 ½” tapered to 2 ½”-deep) provide the best structural integrity in a hand-held locator.
  • Lightweight; only about two pounds including batteries
  • Uses 2 regular alkaline 9-volt batteries, parallel; the unit is shipped with two spare batteries
  • Soft pack carrying case included (optional hard case available) Battery compartment separated from electronic components and the circuit board. No exposing electronics to replace the batteries.

  • Overall Length: 38.75 in (98.4 cm)
  • Weight: 2.0 lbs (0.9 kg) including batteries
  • Input Power: Two (2) standard 9-volt alkaline batteries
  • Batter Life: Est. 40 Hours minimum
  • Warranty: 7 Years

Subsurface Instruments - Subsurface Instruments ML-1 Magnetic Locator
Subsurface Instruments - Subsurface Instruments ML-1 Magnetic Locator

Links to PDFs:

If you have any questions, feel free to contact Instrument Technology Corporation at 800-519-1998. For your convenience, you can request a quote from this site.

Please Call -
800-519-1998

© Instrument Technology Corporation (ITC). All rights reserved.     Website Design by Brymels LLC.     Privacy Policy     Sitemap     Back to top