utility locating equipment cable locating equipment - supplier of utility contractor supplies Vivax-Metrotech is the largest EM pipe & cable manufacturer in the world Vivax-Metrotech Cable and Pipe Locator vivax-Metrotech Cable Locator Pipe Locator Locating Equipment Locator Equipment underground facility locator vLocPro3 vLoc Series vLoc3-Pro Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more utility locating equipment cable locating equipment - supplier of utility contractor supplies Vivax-Metrotech is the largest EM pipe & cable manufacturer in the world Vivax-Metrotech Cable and Pipe Locator vivax-Metrotech Cable Locator Pipe Locator Locating Equipment Locator Equipment underground facility locator vLocPro3 vLoc Series vLoc3-Pro Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more
REPAIR FORM  GET A FREE QUOTE

NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

Pipe Cleaning Nozzles

JAWS®100


NozzTeq Pipe Cleaning Nozzles Jaws 100 - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

JAWS®100 - Description:

JAWS®100 is the smaller version of the JAWS® made with same quality and design as the larger version (quality Swedish stainless steel with a protective rubber cone). The service lifetime is the same as for the larger version, meaning you can easily get +10 years out of the nozzle head. Remember to check the wear of the sled. When sled starts to get worn down the sled should be replaced. The sled and the exchangeable jets are easy to replace.

The JAWS®100 is recommended to be used with 1/2" or 1/4" hose but can be operated on a 1" jetter unit. The effectiveness of the nozzle makes it also a preferred nozzle together with 3/8" hoses, when material such as sand, gravel and stones, need to be removed in pipe.

*Click on the Tabs below to view more information.


MULTI-GLOBAL®


NozzTeq Pipe Cleaning Nozzles multi Global - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

MULTI-GLOBAL® - Description:

MULTI-GLOBAL® sewer penetrating nozzle is a spin off from the popular GLOBAL® series of nozzles but has replaceable orifices. This would be classified as a Tier 2 nozzle. MULTI-GLOBAL® sewer nozzle can be setup in multiple configurations. This sewer nozzle has a short design with a beveled edge to get in those hard-to-reach spots. Also, the design of the nozzle, aids in preventing the nozzle from getting hung up on offset joints or breaks in the pipe. The pipe cleaning nozzle can be used with nozzle extensions or sleds. An extension or sled is highly recommended to prevent the nozzle from turning inside larger diameter pipes.

Uses and applications:
General sewer cleaning, clogged pipes, cleaning of root blockage before cutting etc.

*Click on the Tabs below to view more information.


GOBLIN® GRENADE


NozzTeq Pipe Cleaning Nozzles Goblin Grenade - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

GOBLIN® GRENADE - Description:

The GOBLIN® GRENADE is made in harden stainless steel and is engineered for optimum maneuverability and to prevent nozzle from getting stuck on offsets.

Improved internal flow design, compared with standard nozzles, gives a more efficient general pipe cleaning.

The extended weight can be advantageous since GOBLIN® GRENADE normally stays in the bottom of the pipe. The weight can also be advantages cleaning inside vertical service line where the nozzle needs to "fall" into vertical pipe.

All sizes of GOBLIN® GRENADE have replaceable jet orifices for easy adaptation to different pump capacities and feature one replaceable front jet which can be blocked if desired. Available with stainless steel or ceramic jets.

*Click on the Tabs below to view more information.


GLOBAL™ SP


NozzTeq Pipe Cleaning Nozzles Global SP - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

GLOBAL™ SP - Description:

GLOBAL™ SUPER PENETRATOR has a substantial amount of weight so it sits low on the bottom of the pipe. The specific design minimizes risk of nozzle turning in pipe and allows to successfully navigate over small voids, off-sets, drop connections etc. in the pipe. GLOBAL™ SP has replaceable jet orifices for easy adaptation to different pump capacities and features up to four replaceable front jets that can be blocked if desired.

Field of application:
Regular pipe cleaning, open clogged pipes. Suitable for pipes with offsets or other damages where nozzle easy get trapped.

*Click on Tabs to view more information.

  • Connection:3/8"
  • Pipe dimension: 4 - 6"
  • Jet insert type: Stainless
  • For recyclers: No
  • Length x diameter: 7 x 3.5 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 8 us gpm
  • Pipe dimension: 4" - 6"
  • Rear jets: 4 x m6
  • Weight: 1.5 lbs.

  • Connection: 1/2"
  • Pipe dimension: 6 - 12"
  • Jet insert type: Ceramic
  • For recyclers: No
  • Length x diameter: 10 x 6 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 8 us gpm
  • Pipe dimension: 6"-12"
  • Rear jets: 4 x m6
  • Weight: 1.8 lbs.

  • Connection: 3/4"
  • Pipe dimension: 6 - 12"
  • Jet insert type: Ceramic
  • For recyclers: No
  • Length x diameter: 10 x 6 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 8 us gpm
  • Pipe dimension: 6"-12"
  • Rear jets: 4 x m6
  • Weight: 1.5 lbs.

  • Made of harden nickel coated steel.
  • Replaceable jets made of harden stainless steel or ceramic.
  • Four or six thrusting jets.
  • Four front jets (can be plugged).
  • For pipe inner diameter 2" - 16".
  • Hose connections 1/2" to 1- 1/4".
  • Can be used with extension pipe or sled.

  • Connection: 1/2"
  • For recyclers: No
  • Length x diameter: 1.5 x 1.5 inches
  • Max working pressure: 7000 psi
  • Min water flow at 1450 psi: 8 us gpm
  • Pipe dimension: 2"-9"
  • Rear jets: 6 x m6 (10°)
  • Weight: 0.5 lbs.

  • Connection: 3/4"
  • For recyclers: No
  • Max working pressure: 4350 psi
  • Min water flow at 1450 psi: 13 us gpm
  • Pipe dimension: 3"-12"
  • Rear jets: 6 x m6 - 12°
  • Max diameter well: 2 x 2 inches
  • Weight: 1 lbs.

  • Connection: 1"
  • For recyclers: Yes
  • Front jets: 3 x m6 (9°) + 1 x m6 (0°)
  • Length x diameter: 2.5 x 2.5 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 19 us gpm
  • Pipe dimension: 4-12"
  • Rear jets: 6 x m8 (10°)
  • Weight: 1.5 lbs.

  • Connection: 1 1/4"
  • For recyclers: Yes
  • Front jets: 3 x m6 (10°) + 1 x m6 (0°)
  • Length x diameter: 3.15 x 3.15 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 19 us gpm
  • Pipe dimension: 5-16"
  • Rear jets: 6 x 1/8" (10°)
  • Weight: 4.4 lbs.

  • Connection: 1/2"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x m6 - 0°
  • Length x diameter: 2.5 x 2 inches
  • Max working pressure: 7000 psi
  • Min water flow at 1450 psi: 8 us gpm
  • Pipe dimension: 3" - 9"
  • Rear jets: 6 x m6 - 12°
  • Weight: 1.5 lbs.

  • Connection: 3/4"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x m6 - 0°
  • Length x diameter: 3.5 x 2.3 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 16 us gpm
  • Pipe dimension: 4" - 12"
  • Rear jets: 6 x m6 - 12°
  • Weight: 3 lbs.

  • Connection: 1"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x 1/8" - 0°
  • Length x diameter: 5 x 3 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 19 us gpm
  • Pipe dimension: 5" - 16"
  • Rear jets: 6 x 1/8" - 12°
  • Weight: 8 lbs.

  • Made of harden nickel coated steel.
  • Replaceable jets made of harden stainless steel or ceramic.
  • Six thrusting jets 12°.
  • Four front jets (can be plugged).
  • For pipe inner diameter (6" - 24").
  • Hose connections 3/4", 1" or 1 1/4".

  • Connection: 3/4"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 3 x m6 (9°) + 1 x m6 (0°)
  • Length x diameter: 10 x 3 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 40 us gpm
  • Pipe dimension: 6" - 20"
  • Rear jets: 6 x 1/8" (12°)
  • Weight: 14 lbs.

  • Connection: 1"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 3 x m6 (9°) + 1 x m6 (0°)
  • Length x diameter: 10 x 3 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 40 us gpm
  • Pipe dimension: 6" - 20"
  • Rear jets: 6 x 1/8" (12°)
  • Weight: 14 lbs.

  • Connection: 1-1/4"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 3 x m6 (9°) + 1 x m6 (0°)
  • Length x diameter: 10 x 3 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 40 us gpm
  • Pipe dimension: 6" - 20"
  • Rear jets: 6 x 1/8" (12°)
  • Weight: 14 lbs.

If you have any questions, feel free to contact Instrument Technology Corporation at 800-519-1998. For your convenience, you can request a quote from this site.

Please Call -
800-519-1998

© Instrument Technology Corporation (ITC). All rights reserved.     Website Design by Brymels LLC.     Privacy Policy     Sitemap     Back to top