utility locating equipment cable locating equipment - supplier of utility contractor supplies Vivax-Metrotech is the largest EM pipe & cable manufacturer in the world Vivax-Metrotech Cable and Pipe Locator vivax-Metrotech Cable Locator Pipe Locator Locating Equipment Locator Equipment underground facility locator vLocPro3 vLoc Series vLoc3-Pro Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more utility locating equipment cable locating equipment - supplier of utility contractor supplies Vivax-Metrotech is the largest EM pipe & cable manufacturer in the world Vivax-Metrotech Cable and Pipe Locator vivax-Metrotech Cable Locator Pipe Locator Locating Equipment Locator Equipment underground facility locator vLocPro3 vLoc Series vLoc3-Pro Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more
REPAIR FORM  GET A FREE QUOTE

NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

Bottom Cleaning Nozzles

C-RAY®200


NozzTeq Bottom Cleaning Nozzles Cray 200 - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

C-RAY®200 - Description:

The C-RAY®200 is the smaller version of C-RAY®400 bottom cleaning nozzle. The C-RAY®200 is made in quality stainless steel with same Tier 3 water directing technology inside as its big brother. The water directing technology decrease pressure drop in nozzle by reducing the turbulence inside the nozzle. This means that you only lose less than 10% inside nozzle, which in comparison with many other designs saves you 20-30%. Each day the nozzle is in use you will not only clean effectively but being able to operate your jetter and combination truck at a lower rpm, resulting in less wear and tear of the unit, as well as saved fuel costs, water cost and a reduction of time on site.

The design assures effective and cost saving debris moving in pipe. The bottom part is made of hardox steel with round shape to position the nozzle properly in smaller pipes. The C-RAY® 200 is available with either Stainless Steel inserts or ceramic inserts. It is not recommended for use with recycle water.

C-RAY®200 operate effectively from 8"-24". It is supplied with 6 rear jets and in rare cases a front jet can be installed. Same philosophy as for the C-RAY®400, meaning less is more.

Each C-RAY®200 is supplied with a quality harden stainless steel swivel, that capture the movement of the sewer cleaning hose and make sure the nozzle stays correctly positioned in the pipe.

*Click on the Tabs below to view more information.


C-RAY®400


NozzTeq Bottom Cleaning Nozzles Cray 400 - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles Bottom Cleaning Nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

C-RAY®400 - Description:

Customer that was using the NozzTeq JAWS® nozzle asked NozzTeq to develop a bottom cleaning nozzle with the same technology and quality as the JAWS®. The result was the C-RAY®400 another Tier 3 nozzle. The C-RAY®400 is made in quality stainless steel with the same water directing technology inside for the most effective debris moving power.

A bottom cleaning nozzle is to prefer when pipe is somewhat larger, and the debris is mainly in the bottom of the pipe. Specifically in larger sewer and storm lines.

C-RAY®400 operate effectively, depending on available water pump capacity, from 15"-60". It is supplied with 8 rear jets and, if necessary, a front jet. Many bottom cleaners have more rear jets than this, but when this nozzle was designed based on the Jaws nozzle with its patented tube system, the number of jets can be reduced. With all of NozzTeqs' research and development conducted, we know that it is better to have fewer jets with more power than many with less. This is easy mathematics calculation the diameter of each jet. Comparing a 2 mm jet with a 4 mm jet, the 4 mm jet is four times as thick and four times as strong. The C-RAY®400 is available with either hardened stainless steel or ceramic inserts.

Each C-RAY®400 is delivered with a quality harden stainless steel swivel, which purpose is to capture the movement of the hose and make sure the nozzle stays correctly positioned in pipe.

*Click on Tabs to view more information.

  • Connection: 3/4"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x 1/8"
  • Length x diameter: 18 x 6 x 6 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 35 us gpm
  • Pipe dimension: 8" - 24"
  • Rear jets: 6 x 1/8"
  • Weight: 29 lbs.

  • Connection: 1"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x 1/8"
  • Length x diameter: 18 x 6 x 6 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 35 us gpm
  • Pipe dimension: 8" - 24"
  • Rear jets: 6 x 1/8"
  • Weight: 29 lbs.

  • Connection: 1-1/4"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x 1/8"
  • Length x diameter: 18 x 6 x 6 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 35 us gpm
  • Pipe dimension: 8" - 24"
  • Rear jets: 6 x 1/8"
  • Weight: 29 lbs.

  • Connection: 3/4"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x 1/8"
  • Length x diameter: 22 x 8 x 8 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 50 us gpm
  • Pipe dimension: 16" - 60"
  • Rear jets: 8 x 1/8"
  • Weight: 47 lbs.

  • Connection: 1"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x 1/8"
  • Length x diameter: 22 x 8 x 8 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 50 us gpm
  • Pipe dimension: 16" - 60"
  • Rear jets: 8 x 1/8"
  • Weight: 47 lbs.

  • Connection: 1 1/4"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x 1/8"
  • Length x diameter: 22 x 8 x 8 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 50 us gpm
  • Pipe dimension: 16" - 60"
  • Rear jets: 8 x 1/8"
  • Weight: 47 lbs.

  • Connection: 1-1/2"
  • Jet insert type: Stainless
  • For recyclers: No
  • Front jets: 1 x 1/8"
  • Length x diameter: 22 x 8 x 8 inches
  • Max working pressure: 3500 psi
  • Min water flow at 1450 psi: 50 us gpm
  • Pipe dimension: 16" - 60"
  • Rear jets: 8 x 1/8"
  • Weight: 47 lbs.

If you have any questions, feel free to contact Instrument Technology Corporation at 800-519-1998. For your convenience, you can request a quote from this site.

Please Call -
800-519-1998

© Instrument Technology Corporation (ITC). All rights reserved.     Website Design by Brymels LLC.     Privacy Policy     Sitemap     Back to top