utility locating equipment cable locating equipment - supplier of utility contractor supplies Vivax-Metrotech is the largest EM pipe & cable manufacturer in the world Vivax-Metrotech Cable and Pipe Locator vivax-Metrotech Cable Locator Pipe Locator Locating Equipment Locator Equipment underground facility locator vLocPro3 vLoc Series vLoc3-Pro Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more utility locating equipment cable locating equipment - supplier of utility contractor supplies Vivax-Metrotech is the largest EM pipe & cable manufacturer in the world Vivax-Metrotech Cable and Pipe Locator vivax-Metrotech Cable Locator Pipe Locator Locating Equipment Locator Equipment underground facility locator vLocPro3 vLoc Series vLoc3-Pro Instrument Technology Corporation - Locating equipment. Water leak detection, pipe and cable locators, video inspection systems, sheath fault locators, gas detectors, ground penetrating radar and more
REPAIR FORM  GET A FREE QUOTE

NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles penetrating nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

Penetrating Nozzles

NozzTeq Penetrating Nozzles - NozzTeq Nozzles and Turbine and Milling Cutters - Instecorp authorized dealer of NozzTeq Products - hand nozle bottom cleaning nozzles ejector nozzles hand nozzles high performance nozzles penetrating nozzles pipe cleaning nozzles rotating nozzles sever blockage nozzles lumberjack turbine cutters

Description:

GLOBAL ICEBEAR® is one of our most popular nozzles in the GLOBAL™ series, supplied with three front jets, angled towards the centre of the nozzle. Due to their lightweight and compact construction they easily manoeuvre in pipe and effectively open more severe blockages in pipe sizes from 2" up to 16". GLOBAL ICEBEAR® is supplied with thrusting rear jets and three front jets.

GLOBAL ICEBEAR® is made of harden steel or harden stainless steel. A low jet angle on rear thrusting jets and well-balanced jet sizes (rear and front) assures good traveling power upstream as well as good power, bringing material back.

GLOBAL ICEBEAR® belongs to Tier 1 nozzle group, but because of the construction you can expect better performance than general for Tier-1 nozzles. The outer round shaped design prevent nozzle from getting stuck as well as makes it easy to manoeuvre past and through obstacles.

GLOBAL ICEBEAR® is made with hose connections from ¼" up to 1-¼". Nozzles with same thread are found with different jet sizes to fit most pumps. Each nozzle a have a stated water flowrate at 1450 psi at the nozzle.

GLOBAL ICEBEAR® handle pressures from 2200 psi up to 4350 psi depending on thread size.

*Click on Tabs to view more information.

  • Connection: 1/4"
  • Min. water flow at 100 bar (1450 PSI): 8 us gpm
  • For recyclers: No
  • Front jets: 3 x 0,6 mm
  • Length x diameter: 21 x 20 mm
  • Max working pressure: 4350 psi
  • Min water flow at 1450 psi: 8 us gpm
  • Pipe dimension: 1 1/4" - 4"
  • Rear jets: 4 x 1,25 mm
  • Weight: 0,03 kg

  • Connection: 1/2"
  • Min. water flow at 100 bar (1450 PSI): 30 us gpm
  • For recyclers: No
  • Front jets: 3 x 0,8 mm
  • Length x diameter: 33 x 32 mm
  • Max working pressure: 4350 psi
  • Min water flow at 1450 psi: 30 us gpm
  • Pipe dimension: 2" - 9"
  • Rear jets: 6 x 2,0 mm

  • Connection: 3/4"
  • Min. water flow at 100 bar (1450 PSI): 47 us gpm
  • For recyclers: No
  • Front jets: 3 x 1,0 mm
  • Length x diameter: 43 x 40 mm
  • Max working pressure: 2900 psi
  • Min water flow at 1450 psi: 47 us gpm
  • Pipe dimension: 3" - 12"
  • Rear jets: 6 x 2,4 mm

  • Connection: 1"
  • Min. water flow at 100 bar (1450 PSI): 96 us gpm
  • For recyclers: No
  • Front jets: 3 x 1,5 mm
  • Length x diameter: 52 x 50 mm
  • Max working pressure: 2000 psi
  • Min water flow at 1450 psi: 96 us gpm
  • Pipe dimension: 4" - 16"
  • Rear jets: 6 x 3,5 mm

  • Connection: 1-1/4"
  • Min. water flow at 100 bar (1450 PSI): 95 us gpm
  • For recyclers: No
  • Front jets: 3 x 1,5 mm
  • Length x diameter: 65 x 63 mm
  • Max working pressure: 2000 psi
  • Min water flow at 1450 psi: 96 us gpm
  • Pipe dimension: 4" - 16"
  • Rear jets: 6 x 3,5 mm


GET A FREE QUOTE

CALL FOR DEMO

If you have any questions, feel free to contact Instrument Technology Corporation at 800-519-1998. For your convenience, you can request a quote from this site.

Please Call -
800-519-1998

© Instrument Technology Corporation (ITC). All rights reserved.     Website Design by Brymels LLC.     Privacy Policy     Sitemap     Back to top